LORCH TIG Double Push Button Torch -Gas-cooled 8 m 1700-DD
search
  • LORCH TIG Double Push Button Torch -Gas-cooled 8 m 1700-DD

LORCH TIG Double Push Button Torch -Gas-cooled 8 m 1700-DD

Using this torch, you switch the welding current precisely
“On/Off” and activate the secondary current function if
needed.
- Welding current: The welding process starts by pressing the torch button forward once. Pressing a second time ends the welding process;
- Secondary current: Pressing the torch button backward
activates the secondary current and the welding current
is reduced to the secondary current in fractions of a
second. When the button is released again, you switch
back to the original normal welding current.
  Security policy

Security policy (edit with the Customer Reassurance module)

  Delivery policy

Delivery policy (edit with the Customer Reassurance module)

  Return policy

Return policy (edit with the Customer Reassurance module)

Welding TIG
Lorch TIG torches for optimum work results:
- Highly fl exible hose pack;
- Ergonomically shaped torch handle recess;
- Otimum handling in all positions;
- Low weight, robust design, long service life;
- High durability.In the TIG (Tungsten-Inert-Gas) process, the electric arc is formed between the non-fusible tungsten electrode and the part to be welded. The bow is very intense and can be guided perfectly. A separately fed argon protective gas protects the arc and solder zone against atmospheric access. If necessary, additional material is added manually or with a special cold wire feed.Steel, stainless steel, copper, titanium and others are welded with direct current. The electrode is connected to the negative poleand rectified in the ground. Aluminum, magnesium and its alloys are exclusively welded with alternating current to tear the oxide layer. Then the electrode is blunt. The welding generates a round to spherical shape. With modern sources of current by inverter can also be welded
LR50764800

Data sheet

Ref
LR50764800
EAN
4032083120579
Brand
LORCH
Duty cycle
60 %
Hose length
8 M
Charging current
DC 150 A / AC 120 A
Electrode
0,5 - 2,4 MM
Handle recess
TAMANHO 1
Jack connector
-

Specific References

EAN13
4032083120579
Comments (0)
No customer reviews for the moment.