CHEMITOOL Terracota Polyurethane Adhesive Pu40
search
  • CHEMITOOL Terracota Polyurethane Adhesive Pu40

CHEMITOOL Terracota Polyurethane Adhesive Pu40

- Sealant with high elasticity for motor industry and construction with PU base.

- Suitable for metal, glass, wood, ceramics, cement, stone, PVC and most of the materials used in industry.

- Sandable and paintable.

  Security policy

Security policy (edit with the Customer Reassurance module)

  Delivery policy

Delivery policy (edit with the Customer Reassurance module)

  Return policy

Return policy (edit with the Customer Reassurance module)

- Advantages:

- Excellent adhesion to most materials, without primer.

- Permanently elastic;

- Resistant to moisture, saltwater, grease, household detergents, ageing and weather variations;

- For indoor and outdoor use;

- High elasticity.

- Indications: – Must be used within 24 hours after opening the cartridge, otherwise, the seal may harden. Do not apply at a temperature below 5°C. – Store the cartridges at approximately 20°C before use. – Avoid any contact with the unhardened product, as well as contact with alcohol or ammonia during the hardening process.

- Applications:

- Recommended for use in joints of prefabricated expansion panels, wood, aluminium, PVC and expansion joints in traditional construction. It is also highly recommended for bonding baked clay and concrete tiles.

- This sealant has excellent adhesion, without primer, on materials such as lacquered metals, polyester, glass, stone and ceramic tiles.

- Instructions:

- The surfaces must be well cleaned and dry, degreased and free of friable

CH04010004

Datablad

Ref
CH04010004
EAN
5608907437773
Marca
CHEMITOOL CHEMICALS
Resistência à temperatura
-40°C A +80°C
Tempo de cura
3MM/24H (23°C/55%HR)
Densidade
A 20°C: 1,18 ± 0,05
Temperatura de aplicação
+5ºC A +35ºC
Base
POLIURETANO
Alongamento à rutura
(ISO 8339) APROX. 600%
Cartucho
300 ML
Dureza Shore A
(ISO 868) APROX. 0,4 MPA
Módulo de Elasticidade
(ISO 8339) APROX. 0,4 MPA
Validade
12 MESES
Tempo de formação de película
APROX. 70 MINUTOS
Escorrimento
NENHUM
Módulo de Rutura
(ISO 37) 1,40 MPA

Särskilda referenser

ean13
5608907437773
Kommentarer (0)
Det finns inga kundrecensioner just nu.